SINOHYDRO Corporation Limited is recruiting 2 Riggers for the Mpilo–Maseru Central Bridges Project in Maseru, Lesotho.
Applicants must have a recognised Rigger Certificate, Lifting Competency Certificate or equivalent qualification and at least 5 years of experience. Candidates must also have proven experience in erecting, modifying and dismantling scaffolding and be competent to work safely at height.
Applications close on 18 September 2026.
Job Overview
| Job Detail | Information |
|---|---|
| Company | SINOHYDRO Corporation Limited |
| Position | Rigger |
| Positions Available | 2 |
| Project | Mpilo–Maseru Central Bridges Project |
| Location | Maseru, Lesotho |
| Qualification | Recognised Rigger Certificate / Lifting Competency Certificate or equivalent |
| Experience | Minimum 5 years |
| Key Experience | Erecting, modifying and dismantling scaffolding |
| Safety Requirement | Competent to work safely at height and comply with scaffold safety requirements |
| Application Method | |
| Closing Date | 18 September 2026 |
| Salary | Not stated |
About SINOHYDRO and the Project
SINOHYDRO Corporation Limited is the main contractor for the construction of the Mpilo–Maseru Central Bridges Project under the Ministry of Local Government, Chieftainship and Police.
The project involves the construction of reinforced concrete bridges and associated civil works at four designated project zones within Maseru.
Applications are invited from suitably qualified, experienced, committed and safety-conscious Basotho candidates.
Rigger X2
2 Positions Available
SINOHYDRO requires experienced Riggers who can demonstrate relevant practical experience and safely carry out work at height.
According to the vacancy, candidates must have proven experience in:
- Erecting scaffolding
- Modifying scaffolding
- Dismantling scaffolding
- Working safely at height
- Complying with scaffold safety requirements
Applicants should make these areas of experience clear in their CV.
Minimum Qualification
Applicants must hold one of the following:
- Recognised Rigger Certificate
- Lifting Competency Certificate
- Equivalent qualification
Certified copies of relevant educational or competency certificates must be submitted as part of the application.
Experience Required
Applicants need:
Minimum 5 years’ experience
The vacancy also specifically asks for proven experience in erecting, modifying and dismantling scaffolding.
Candidates should provide accurate employment dates and enough information in their CV to demonstrate that they meet the five-year minimum.
Scaffolding Experience
Applicants must have proven experience involving:
Erecting Scaffolding
Candidates should be able to demonstrate practical experience in scaffold erection.
Modifying Scaffolding
Experience safely modifying scaffolding according to work requirements is also required.
Dismantling Scaffolding
Candidates need practical experience in the safe dismantling of scaffolding.
The vacancy describes these as required areas of experience rather than merely advantageous skills.
Working Safely at Height
Candidates must be:
Competent to work safely at height
Applicants should therefore have a strong understanding of safe working practices when performing elevated construction activities.
Scaffold Safety Requirements
Candidates must also be able to:
Comply with scaffold safety requirements
SINOHYDRO specifically seeks safety-conscious candidates, so applicants should clearly demonstrate genuine safety knowledge and experience.
Who Can Apply?
Applications are invited from:
Suitably qualified, experienced, committed and safety-conscious Basotho candidates.
Applicants should ensure they hold the required Rigger/Lifting Competency qualification and have at least five years of relevant experience.
Salary
The salary or remuneration package for the 2 Rigger positions is not stated in the supplied vacancy advertisement.
Documents Required
Applications must be accompanied by:
- An application letter for the specific position.
- A detailed CV of not more than 5 pages.
- Copies of certified educational certificates.
- Three work-related reference letters with contact details of referees.
- At least one reference letter from a current or previous supervisor/employer.
All qualifications and work experience submitted should be genuine and verifiable.
Important Application Format
The vacancy instructs candidates to email the required documentation in read-only PDF format and refers to a compressed folder and ONE DOCUMENT.
Applicants should carefully follow the stated submission instructions because failure to comply may result in disqualification.
If the exact document arrangement is unclear, candidates can contact SINOHYDRO using the enquiry number below during office hours.
How to Apply
Email your application to:
Clearly state in your application letter that you are applying for:
Rigger
Ensure all required supporting documents are included and that your detailed CV is no longer than five pages.
Important: No deliveries are accepted.
Applicants should therefore submit their applications using the stated email method rather than attempting to hand-deliver them.
Practical Skills / Competency Assessment
Shortlisted candidates may be required to undergo a practical skills or competency assessment.
Applicants should therefore be prepared to demonstrate the abilities and experience stated in their applications.
The exact format of the assessment is not provided in the vacancy.
Verification of Qualifications and Experience
SINOHYDRO warns that:
Fraudulent or unverifiable qualifications and experience will result in disqualification.
Applicants should only provide genuine qualifications, certificates, employment history and references.
Further Information
For further information about applications, contact:
+266 5681 1670
Enquiries should be made during office hours.
Closing Date
18 September 2026
Applications must be submitted on or before the closing date.
Shortlisting and Response Period
Only shortlisted candidates will be contacted.
The response period is 14 days after the closing date. Applicants who have not been contacted during this period should regard their applications as unsuccessful.
CV Tips for SINOHYDRO Rigger Applicants
Keep your CV within the required five-page maximum and make your relevant rigging and scaffolding experience easy for the recruiter to identify.
Place your Rigger Certificate, Lifting Competency Certificate or equivalent qualification prominently under your qualifications.
Your employment history should clearly demonstrate at least five years of experience, with accurate starting and ending dates.
Where genuinely applicable, highlight:
- Rigging experience
- Scaffolding erection
- Scaffolding modification
- Scaffolding dismantling
- Working safely at height
- Scaffold safety procedures
- Construction-site safety
- Relevant lifting competency
Because the vacancy specifically requires proven scaffolding experience, avoid using vague descriptions such as only “worked as a Rigger.” Explain the relevant work you actually performed.
Example CV Profile
If accurate, you could adapt:
Qualified Rigger with a recognised Rigger/Lifting Competency Certificate and more than five years of relevant experience. Proven experience in erecting, modifying and dismantling scaffolding, with strong knowledge of scaffold safety requirements and safe working practices at height. Safety-conscious, reliable and experienced in construction environments.
Only use statements that genuinely reflect your experience.
Possible Interview Questions
Candidates preparing for the SINOHYDRO Rigger recruitment process could practise questions such as:
- Tell us about your experience as a Rigger.
- What Rigger or Lifting Competency qualification do you hold?
- How many years of relevant experience do you have?
- What construction projects have you previously worked on?
- Describe your experience erecting scaffolding.
- What experience do you have modifying scaffolding?
- Describe your experience dismantling scaffolding.
- What checks do you perform before working on scaffolding?
- How do you determine whether scaffolding is safe to use?
- What hazards do you consider when working at height?
- What personal protective equipment do you use when working at height?
- What would you do if you discovered unsafe scaffolding?
- How do you ensure scaffold safety requirements are followed?
- What precautions should be taken before dismantling scaffolding?
- How do you maintain safety while working under pressure?
- What would you do if someone asked you to continue working in unsafe conditions?
- How do you communicate safety concerns to supervisors and co-workers?
- Tell us about a difficult scaffolding task you have completed.
- How do you prepare for work at height?
- How do you make sure your equipment is suitable before starting work?
- How do you work effectively with other construction workers?
- What is your approach to following site safety procedures?
- How do you respond when site conditions change?
- Are you prepared to undergo a practical skills/competency assessment?
- Why should SINOHYDRO appoint you as a Rigger?
These are suggested preparation questions, not official SINOHYDRO interview questions.
Frequently Asked Questions
How many Rigger positions are available?
SINOHYDRO is recruiting 2 Riggers.
Where are the positions based?
The vacancies relate to the Mpilo–Maseru Central Bridges Project in Maseru, Lesotho.
What qualification is required?
A recognised Rigger Certificate, Lifting Competency Certificate or equivalent.
How much experience is required?
Applicants need at least 5 years of experience.
Is scaffolding experience required?
Yes. Applicants need proven experience in erecting, modifying and dismantling scaffolding.
Do candidates need to work at height?
Yes. Applicants must be competent to work safely at height.
Are scaffold safety skills required?
Yes. Candidates must be able to comply with scaffold safety requirements.
Who can apply?
The vacancy invites suitably qualified, experienced, committed and safety-conscious Basotho candidates.
How long can my CV be?
The detailed CV must be no more than five pages.
How many reference letters are required?
Applicants need three work-related reference letters, including one from a current or previous supervisor/employer.
Can applications be hand-delivered?
No. The advertisement specifically states “No deliveries accepted.”
Where should applications be sent?
Applications should be emailed to smbrecruitment8@outlook.com.
Will there be a practical assessment?
Possibly. Shortlisted candidates may be required to undergo a practical skills/competency assessment.
What is the salary?
The salary is not stated.
When is the closing date?
Applications close on 18 September 2026.