SINOHYDRO Corporation Limited is recruiting 1 Loader Operator for the Mpilo–Maseru Central Bridges Project in Maseru, Lesotho.
The position requires a recognised Heavy Equipment/Loader Operator Certificate or equivalent, a valid operator licence/certificate and at least 5 years of experience. Candidates should have proven experience operating wheel loaders on construction or mining sites.
Applications close on 18 September 2026.
Job Overview
| Job Detail | Information |
|---|---|
| Company | SINOHYDRO Corporation Limited |
| Position | Loader Operator |
| Positions Available | 1 |
| Project | Mpilo–Maseru Central Bridges Project |
| Location | Maseru, Lesotho |
| Qualification | Recognised Heavy Equipment/Loader Operator Certificate or equivalent |
| Experience | Minimum 5 years |
| Operator Licence/Certificate | Required |
| Industry Experience | Construction/mining experience |
| Application Method | |
| Closing Date | 18 September 2026 |
| Salary | Not stated |
About SINOHYDRO and the Project
SINOHYDRO Corporation Limited is the main contractor for construction of the Mpilo–Maseru Central Bridges Project under the Ministry of Local Government, Chieftainship and Police.
The project involves the construction of reinforced concrete bridges and associated civil works across four designated project zones within Maseru.
SINOHYDRO is inviting suitably qualified, experienced, committed and safety-conscious Basotho candidates to apply.
Loader Operator X1
The company has one Loader Operator position available.
The successful candidate should have substantial practical experience operating wheel loaders, particularly within construction or mining environments.
Candidates must also demonstrate competence in:
- Loading operations
- Stockpiling
- Material handling
- Equipment safety
- Daily equipment inspections
Minimum Qualification
Applicants need a:
Recognised Heavy Equipment/Loader Operator Certificate or equivalent
The vacancy also specifically states that a:
Valid operator licence/certificate is required.
Candidates should ensure that their operator credentials are valid and can be verified.
Experience Required
Applicants need:
Minimum 5 years’ experience
Candidates should also have proven experience:
Operating wheel loaders on construction or mining sites
This is therefore an experienced operator vacancy rather than an entry-level heavy-equipment opportunity.
Required Loader Operating Experience
The vacancy specifically seeks candidates who are competent in:
- Loading
- Stockpiling
- Material handling
Applicants should clearly describe their genuine experience in these areas on their CV.
If possible, identify the types of sites where you worked and the wheel loaders or heavy equipment you operated.
Equipment Safety and Inspections
Candidates should have good knowledge of:
- Equipment safety
- Daily equipment inspections
Safety awareness is particularly important because SINOHYDRO specifically invites applications from safety-conscious candidates.
The supplied vacancy does not provide a detailed list of day-to-day duties beyond the operating competencies above, so additional responsibilities should not be assumed.
Who Can Apply?
The advertisement invites applications from:
Suitably qualified, experienced, committed and safety-conscious Basotho candidates.
Applicants should make sure they meet the qualification, operator certification and minimum five-year experience requirement before applying.
Salary
The salary or remuneration package for the SINOHYDRO Loader Operator position is not stated in the vacancy advertisement.
Documents Required
Your application must include:
- Application letter for the specific position.
- A detailed CV of not more than 5 pages.
- Copies of certified educational certificates.
- Three work-related reference letters with contact details of the referees.
- At least one reference letter from your current or previous supervisor/employer.
Applicants should carefully follow the document requirements because non-compliant applications may be disqualified.
Important Email and PDF Instructions
The vacancy instructs candidates to email their application documents in read-only PDF format and refers to a compressed folder and ONE DOCUMENT.
Applicants should follow the stated formatting requirements as closely as possible. If the instruction is unclear, the employer has provided a contact number for application-related enquiries.
The vacancy warns that failure to follow the required application format may result in disqualification.
How to Apply
Applications should be emailed to:
Make sure your application clearly identifies the position you are applying for:
Loader Operator
Include all required documents and submit them on or before the closing date.
Important: No deliveries are accepted.
Applicants should therefore use the stated email application process and should not attempt to hand-deliver applications.
Practical Skills Assessment
Shortlisted candidates may be required to undergo a practical skills or competency assessment.
Loader Operator candidates should therefore be prepared to demonstrate their genuine ability to safely operate relevant heavy equipment if requested.
The exact assessment procedure is not stated in the vacancy.
Verification of Qualifications and Experience
SINOHYDRO warns that:
Fraudulent or unverifiable qualifications and experience will result in disqualification.
Applicants should submit only genuine certificates, licences, employment history and references that can be verified.
Further Information
For application-related enquiries, contact:
+266 5681 1670
The company requests that enquiries be made during office hours.
Closing Date
18 September 2026
Applications must be submitted on or before the closing date.
Shortlisting and Response Period
Only shortlisted candidates will be contacted.
The stated response period is 14 days after the closing date. Candidates who have not been contacted during that period should regard their applications as unsuccessful.
CV Tips for SINOHYDRO Loader Operator Applicants
Keep your CV to the required maximum of five pages and focus strongly on your heavy-equipment operating experience.
Near the top of your CV, clearly state your Heavy Equipment/Loader Operator qualification and valid operator licence/certificate.
Your employment history should demonstrate at least five years of relevant experience. Include the dates for each position so recruiters can easily calculate your total experience.
Clearly highlight your experience operating wheel loaders on construction or mining sites. Mention loading, stockpiling and material-handling duties where genuinely applicable.
Safety experience is also important. Explain your genuine experience with daily equipment inspections, defect reporting and safe equipment operation.
Make sure your three work-related references are valid and contactable, with at least one coming from your current or previous supervisor/employer.
Example CV Profile
If it accurately reflects your background, you could adapt:
Qualified Heavy Equipment/Loader Operator with more than five years of experience operating wheel loaders in construction and/or mining environments. Experienced in loading, stockpiling, material handling and conducting daily equipment inspections. Safety-conscious, reliable and committed to operating heavy equipment efficiently while following site and equipment safety requirements.
Only include claims you can genuinely support.
Possible Interview Questions
Candidates preparing for the SINOHYDRO recruitment process could practise questions such as:
- Tell us about your experience as a Loader Operator.
- How many years have you operated heavy equipment?
- What Loader Operator qualification do you hold?
- Is your operator licence/certificate currently valid?
- What types of wheel loaders have you operated?
- Have you worked on construction sites?
- Have you worked on mining sites?
- Describe your experience with loading operations.
- What experience do you have with stockpiling?
- Explain your experience with material handling.
- What checks do you perform before operating a wheel loader?
- Why are daily equipment inspections important?
- What would you do if you discovered a defect during an inspection?
- What would you check before starting the engine?
- How do you maintain safe operating distances from workers and other equipment?
- What are some common hazards when operating a wheel loader?
- How do you operate safely in congested construction areas?
- What would you do if visibility around the machine was limited?
- How do you communicate with ground personnel?
- What would you do if the loader developed a mechanical problem during operation?
- How do you ensure materials are stockpiled safely?
- Tell us about a difficult operating situation you have handled.
- How do you maintain productivity without compromising safety?
- Are you comfortable undergoing a practical operating assessment?
- Why should SINOHYDRO select you as its Loader Operator?
These are suggested preparation questions, not official SINOHYDRO interview questions.
Frequently Asked Questions
How many Loader Operator positions are available?
There is 1 position available.
Where is the position based?
The vacancy relates to the Mpilo–Maseru Central Bridges Project in Maseru, Lesotho.
What qualification is required?
A recognised Heavy Equipment/Loader Operator Certificate or equivalent.
Is an operator licence required?
Yes. The vacancy states that a valid operator licence/certificate is required.
How much experience is required?
At least 5 years of experience.
What type of operating experience is preferred?
Candidates should have proven experience operating wheel loaders on construction or mining sites.
What practical skills are important?
Candidates should be competent in loading, stockpiling and material handling.
Who is invited to apply?
The advertisement invites suitably qualified, experienced, committed and safety-conscious Basotho candidates.
What documents must I submit?
An application letter, CV of no more than five pages, certified educational certificates and three work-related reference letters.
Can I hand-deliver my application?
No. The vacancy states “No deliveries accepted.”
Where should I send my application?
Email it to smbrecruitment8@outlook.com.
Will there be a practical test?
Possibly. Shortlisted candidates may be required to complete a practical skills/competency assessment.
What is the salary?
The salary is not stated.
When is the closing date?
Applications close on 18 September 2026.